EVAL_PASCO2_MINIBOARD

Infineon has leveraged its knowledge in sensors and MEMs technologies to develop a disruptive gas sensor for CO2 sensing, the XENSIV™ PAS CO2. The sensor is housed in an exceptionally small form factor based on the photoacoustic spectroscopy (PAS) technique.

 

FEATURES

  • 0 ppm to 32,000 ppm operating range
  • Accuracy of +/- (30 ppm + 3%) of reading between 400 ppm and 5,000 ppm
  • Operating temperature of 0 – 50o C and operating relative humidity of 0% – 85% (noncondensing)
  • Interfaces include 12C, UART, and PWM

APPLICATIONS

  • Building automation

  • Home appliances

  • Smart home IoT devices

  • City management/CO2 emissions control

EVAL BGA123N6

The BGA123N6 is designed to enhance GNSS signal sensitivity especially in wearables and mobile cellular IoT applications.


FEATURES

  • Operation frequencies: 1550 MHz to 1615 MHz
  • Ultra low current consumption: 1.3 mA
  • Wide supply voltage range: 1.1 V to 3.3 V

APPLICATIONS

  • Wearables
  • Mobile cellular applications TRx (4G, 5G)

SHIELD_AUTONOM_BGT60

The 60-GHz radar MMIC is a fully integrated microwave motion sensor including Antennas in Package (AIP) as well as integrated detectors for motion and direction of motion. A state machine enables operation of the device without any external microcontroller.


FEATURES

  • 3.3 x 6.7 x 0.56 mm package size
  • 1Tx 1Rx Antennas in Package (AIP) with 80° field of view
  • Integrated detectors for motion and direction of motion

BENEFITS

Autonomous mode:

  • Up to 7 m detection range for humans
  • Less than 2 mW power consumption possible
  • Requires minimal external circuitry

SPI mode:

  • Up to 10 m detection range for human targets
  • Requires microcontroller unit (e.g. Arm Cortex-M0)
  • Advanced functionalities by SPI configuration or further signal processing

EVAL BGA125N6

The BGA125N6 is designed to enhance GNSS signal sensitivity for band L2/L5 especially in wearables and mobile cellular IoT applications.


FEATURES

  • Operation frequencies: 1164 MHz to 1300 MHz
  • Ultra low current consumption: 1.3 mA
  • Wide supply voltage range: 1.1 V to 3.3 V

APPLICATIONS

  • Wearables
  • Mobile cellular applications TRx (4G, 5G)

EVAL_PASCO2_MINIBOARD

Infineon has leveraged its knowledge in sensors and MEMs technologies to develop a disruptive gas sensor for CO2 sensing, the XENSIV PAS CO2. The sensor is housed in an exceptionally small form factor based on the photoacoustic spectroscopy (PAS) technique.


FEATURES

  • 0 ppm to 32,000 ppm operating range
  • Accuracy of +/- (30 ppm + 3%) of reading between 400 ppm and 5,000 ppm
  • Operating temperature of 0 – 50o C and operating relative humidity of 0% – 85% (noncondensing)
  • Interfaces include 12C, UART, and PWM

APPLICATIONS

  • Building automation

  • Home appliances

  • Smart home IoT devices

  • City management/CO2 emissions control

EVAL BGA123N6

The BGA123N6 is designed to enhance GNSS signal sensitivity especially in wearables and mobile cellular IoT applications.

 

FEATURES

  • Operation frequencies: 1550 MHz to 1615 MHz
  • Ultra low current consumption: 1.3 mA
  • Wide supply voltage range: 1.1 V to 3.3 V

APPLICATIONS

  • Wearables
  • Mobile cellular applications TRx (4G, 5G)

SHIELD_AUTONOM_BGT60

The 60-GHz radar MMIC is a fully integrated microwave motion sensor including Antennas in Package (AIP) as well as integrated detectors for motion and direction of motion. A state machine enables operation of the device without any external microcontroller.

FEATURES

  • 3.3 x 6.7 x 0.56 mm package size
  • 1Tx 1Rx Antennas in Package (AIP) with 80° field of view
  • Integrated detectors for motion and direction of motion

BENEFITS

Autonomous mode:

  • Up to 7 m detection range for humans
  • Less than 2 mW power consumption possible
  • Requires minimal external circuitry

SPI mode:

  • Up to 10 m detection range for human targets
  • Requires microcontroller unit (e.g. Arm Cortex-M0)
  • Advanced functionalities by SPI configuration or further signal processing

EVAL BGA125N6

The BGA125N6 is designed to enhance GNSS signal sensitivity for band L2/L5 especially in wearables and mobile cellular IoT applications.

 

FEATURES

  • Operation frequencies: 1164 MHz to 1300 MHz
  • Ultra low current consumption: 1.3 mA
  • Wide supply voltage range: 1.1 V to 3.3 V

APPLICATIONS

  • Wearables
  • Mobile cellular applications TRx (4G, 5G)